現在，我國市場上出售的小份額鐵藝機器人模型主要有1/76和1/72兩種。1/76的機器人模型多是國產的，其精 密度高，價格便宜，種類也多，還有配套的小兵人，是非常受歡迎的機器人模型。1/72的機器人模型大多是進口的，價格高一些，也不容易買到，但有的種類是1/76模型中沒有的，此外，1/72的機器人模型還能夠與1/72飛機模型配套組成機場場景。

At present, there are mainly 1 / 76 and 1 / 72 kinds of small share of iron robot models sold in China's market. 1 / 76 of the robot models are mostly made in China, with high precision, low price, many kinds, and supporting small soldiers. They are very popular robot models. Most of the 1 / 72 robot models are imported, which are expensive and not easy to buy, but some of them are not included in the 1 / 76 model. In addition, the 1 / 72 robot model can also be used with the 1 / 72 aircraft model to form an airport scene.

在制造小份額機器人模型時，除預備一般的模型制造東西外，還要預備幾種特別的東西：尖頭鑷子（用來夾細微的零件）；細齒的小銼；直徑1mm-2mm左右的小鉆頭（假如沒有，可用大頭針敲扁剪成寶劍型替代）。模型涂料一般有兩種能夠選用。

When making a small number of robot models, in addition to preparing general models to make things, there are also several special things to prepare: pointed tweezers (used to clamp fine parts); A small file with fine teeth; A small drill with a diameter of about 1 mm-2 mm (if not, it can be flattened with a pin and cut into a sword type). Generally, there are two kinds of model coatings that can be selected.

一、專用的模型漆（一般都運用無光澤的那種），其長處是附著力強、色彩傳神。

1、 Special model paint (generally use the kind of matte), its advantages are strong adhesion, vivid color.

二、美術繪畫用的丙烯顏料，此顏料用水作稀釋劑，運用方便，價格便宜，做泥土涂飾時質感強無光澤，缺陷是附著力不如模型漆，并且還需要自己調色（丙烯顏料只要基本性，調色要有必定的美術根底）。由于這兩種涂料各有優缺陷，也能夠調配運用，揚長避短。

2、 Acrylic pigment used in art painting, which uses water as diluent, is easy to use and cheap. It has strong texture and no luster when it is used as clay coating. The defect is that the adhesion is not as good as model paint, and it also needs its own color matching (as long as the acrylic pigment is basic, the color matching must have a certain art foundation). Because these two kinds of coatings have their own advantages and disadvantages, they can also be used to develop advantages and avoid disadvantages.

小份額機器人模型的拼裝進程與其他模型的拼裝過程差不多，主要是拼裝前在加工上要多下功夫。每一個零件剪下后，都要用小銼把注塑時構成的合模線和注塑口細心地銼平，炮管一類的圓形零件更要細心修整。假如你有一柄尖利隨手的刀子，以上的作業也能夠用刀刮來替代，由于用刀子刮去合模線有時要比銼的平坦。

The assembly process of a small number of robot models is similar to that of other models, mainly due to more efforts in processing before assembly. After each part is cut, the clamping line and injection opening formed during injection molding should be carefully filed with a small file, and round parts such as gun barrel should be carefully trimmed. If you have a sharp knife at hand, the above operations can also be replaced by a knife scraper. Sometimes it is smoother than a file to scrape the clamping line with a knife.

感謝您的閱讀，希望以上內容對您有所幫助，如您想了解更多精彩內容請點擊我們的官網：大型機器人模型制作http://www.clocorp.com。

Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: large robot model making http://www.clocorp.com .